Surface modification of an epoxy resin with polyamines via cyanuric chloride coupling

The presence of polyamine groups on the surface of dielectric resins potentially improves the adhesion with electrochemically deposited metals. In this article, first cyanuric chloride is covalently bound to the surface hydroxyl groups of the epoxy resin. The remaining reactive sites on the coupled cyanuric chloride molecule are then used to anchor polyamines. New data on the triazine coupling is presented. The surface reactions are monitored and characterized by means of ATR-IR, SEM-EDS, XPS and ToF-S-SIMS.     

Existence of solutions in variational relation problems without convexity

Two main existence conditions for solutions of variational relation problems are established without convexity. The first one is based on a finite solvability property and the second one on generalized KKM mappings. These conditions unify and strengthen several existing results in the literature on the topic. A model of satisficing process by rejection is considered which gives an economic interpretation of the introduced concepts.     

Identification of phosphorylation sites of equine β‐casein isoforms

Equine β‐casein is phosphorylated at variable degrees and isoforms carrying 3 to 7 phosphate groups (3P–7P) have been found in milk, but the phosphorylated amino acid residues of each isoform are not yet identified. In the present work, the different phosphorylation variants were first isolated by ion‐exchange chromatography and then hydrolysed by trypsin to generate caseinophosphopeptides (CPPs), each containing all the potential phosphorylation sites. The equine CPPs were prepared by metal oxide affinity chromatography, a method based on the affinity of phosphate groups towards titanium dioxide immobilized onto a micro‐column. This method turned out to be an efficient tool to separate the CPPs Arg¹–Lys³⁴ and Glu⁴–Lys³⁴ from non‐phosphorylated peptides. Purification was achieved by reversed‐phase high‐performance liquid chromatography (RP‐HPLC) and each CPP was hydrolyzed by endoproteinase Glu‐C. Finally, the digests were analyzed by RP‐HPLC/electrospray ionization mass spectrometry (RP‐HPLC/ESI‐MS) and identified by nano‐electrospray ionization tandem mass spectrometry (nESI‐MS/MS) to locate the phosphorylated sites of the β‐casein isoforms 4P–7P with accuracy. Thus, the isoform 4P was found to be phosphorylated on residues Ser⁹, Ser²³, Ser²⁴, and Ser²⁵. Addition of phosphate groups on Ser¹⁸, Thr¹², and Ser¹⁰ led to the formation of the isoforms 5P–7P, respectively. The results indicated that the in vivo phosphorylation of the equine β‐casein follows a sequential way and is not randomly performed. Copyright © 2010 John Wiley & Sons, Ltd.     

Dimerisation Process of Silybin‐Type Flavonolignans: Insights from Theory

Natural polyphenols are known to be oxidized by free radicals, which partially explains the antioxidant properties of a number of these compounds. This oxidation may also be used to synthesise new compounds of biological interest, for example, dimers. The present theoretical study describes the existing experimental evidence showing that silybin and dehydrosilybin [natural polyphenols isolated from milk thistle (Silybum marianum)] form dimers regioselectively. Based on DFT calculations, thermodynamic and kinetic values were computed in order to better understand the physicochemical behaviour of these dimerisation processes. Calculations showed that after H‐atom transfer (from polyphenol to radical), dimerisation could proceed in two steps: 1) bond formation and, when possible, 2) tautomerisation reorganisation. The former step is the limiting step, while the latter is crucial for the process to be thermodynamically favourable (ΔG<0). If this rearrangement is impossible then dimerisation is not feasible, or at least becomes a minor process (e.g., dehydrosilybin dimerisation after H‐atom abstraction from the 3‐OH group). This explains the regioselectivity of polyphenol dimerisation.     

Sard theorems for Lipschitz functions and applications in optimization

We establish a “preparatory Sard theorem” for smooth functions with a partially affine structure. By means of this result, we improve a previous result of Rifford [17, 19] concerning the generalized (Clarke) critical values of Lipschitz functions defined as minima of smooth functions. We also establish a nonsmooth Sard theorem for the class of Lipschitz functions from R^d to R^p that can be expressed as finite selections of C^k functions (more generally, continuous selections over a compact countable set). This recovers readily the classical Sard theorem and extends a previous result of Barbet–Daniilidis–Dambrine [1] to the case p > 1. Applications in semi-infinite and Pareto optimization are given.     

Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

Comparison of direct mass spectrometry methods for the on‐line analysis of volatile compounds in foods

For the on‐line monitoring of flavour compound release, atmospheric pressure chemical ionization (APCI) and proton transfer reaction (PTR) combined to mass spectrometry (MS) are the most often used ionization technologies. APCI‐MS was questioned for the quantification of volatiles in complex mixtures, but direct comparisons of APCI and PTR techniques applied on the same samples remain scarce. The aim of this work was to compare the potentialities of both techniques for the study of in vitro and in vivo flavour release. Aroma release from flavoured aqueous solutions (in vitro measurements in Teflon bags and glass vials) or flavoured candies (in vivo measurements on six panellists) was studied using APCI‐ and PTR‐MS. Very similar results were obtained with both techniques. Their sensitivities, expressed as limit of detection of 2,5‐dimethylpyrazine, were found equivalent at 12 ng/l air. Analyses of Teflon bag headspace revealed a poor repeatability and important ionization competitions with both APCI‐ and PTR‐MS, particularly between an ester and a secondary alcohol. These phenomena were attributed to dependency on moisture content, gas/liquid volume ratio, proton affinities and product ion distribution, together with inherent drawbacks of Teflon bags (adsorption, condensation of water and polar molecules). Concerning the analyses of vial headspace and in vivo analyses, similar results were obtained with both techniques, revealing no competition phenomena. This study highlighted the equivalent performances of APCI‐MS and PTR‐MS for in vitro and in vivo flavour release investigations and provided useful data on the problematic use of sample bags for headspace analyses. Copyright © 2013 John Wiley & Sons, Ltd.     

Conduction calorimetric studies of ternary binders based on Portland cement, calcium aluminate cement and calcium sulphate

Different binders of Portland cement, calcium aluminate cement and calcium sulphate (PC/CAC/C $ {\bar{\text{S}}} $ ) have been investigated to determinate the influence the CAC and C $ {\bar{\text{S}}} $ amount in the reactions mechanism. Several mixtures were studied, ratios of 100, 85/15 and 75/25 of PC/CAC with 0, 3 and 5 % of C $ {\bar{\text{S}}} $ . Conduction calorimetric technique was used to follow the hydration during 100 h. The XRD and FTIR techniques were used as support in the analysis of the hydration products. The results have shown that the studied ternary systems form an extra amount of ettringite, and changes in the reactions mechanism with respect to a PC. The reactions mechanism depends on the CAC and C $ {\bar{\text{S}}} $ amount present in the different binders.     

Magnetic Hyperthermia Enhancement in Iron-based Materials Driven by Carbon Support Interactions

Magnetic hyperthermia (MH) shows great potential in clinical applications because of its very localized action and minimal side effects. Because of their high saturation magnetization values, reduced forms of iron are promising candidates for MH. However, they must be protected in order to overcome their toxicity and instability (i. e., oxidation) under biological conditions. In this work, a novel methodology for the protection of iron nanoparticles through confinement within graphitic carbon layers after thermal treatment of preformed nanoparticles supported on carbon is reported. We demonstrate that the size and composition of the nascent confined iron nanoparticles, as well as the thickness of their protective carbon layer can be controlled by selecting the nature of the carbon support. Our findings reveal that a higher nanoparticle–carbon interaction, mediated by the presence of oxygen-containing groups, induces the formation of small and well-protected α-Fe-based nanoparticles that exhibit promising results towards MH based on their enhanced specific absorption rate values.